2020-03-16
Fivetech indicative design AUTO LOCK QT built-in Torsion Spring can auto spring back to unlock the lock function, strong torsion spring springs back to lock, understand the internal server storage system of servo storage equipment-the best key fastener solution for cooling fans
The handling of server heat dissipation issues plays an important role in the design scope of the server system. Know that the internal cooling fans of the servo storage equipment system are placed in the chassis. When the server is being designed, the fans can be quickly disassembled, inserted, and accurately Installation positioning is an important issue to be considered during design, otherwise the inconvenience and failure rate will seriously affect the overall supply and demand situation of the data center operation.
The server cooling fan is arranged in the chassis. The use of the built-in Torsion Spring in the AUTO LOCK QT automatically rebounds and unlocks the lock function is an indicator design of Fivetech. We can measure the size and performance of the fan as a partial AUTO LOCK at the buckle. The lock is specially designed. When unlocking, it only needs to rotate 4/1 turns to unlock. When returning to the positioning of the fan box, also twist the AUTO LOCK buckle, and the torsion spring will spring back and lock automatically.
With the increasing integration of server storage equipment, the fans used in the server CPU, chassis, graphics card, and power supply are the defenders of the normal and stable operation of the server. Therefore, the design of the cooling fan fastener of the server is a key requirement condition. Because the frequency of server fan extraction and removal is usually high, whether the fan can be disassembled effectively is one of the prerequisites for the stable operation of the server.
In order to ensure the uninterrupted work of the server, the good fan cooling system in the chassis is not damaged by the failure of one or several fans, and the entire group of chassis normal operation. The server fans can use Auto Lock QT fasteners, which can be replaced at any time. Failed fan. Ensure that when the working fan is damaged, replace the new cooling fan immediately to continue the servo storage work. Or when the system works normally, the main fan works and the backup fan does not work. When the main fan fails or the speed is lower than the specified speed, it will automatically start Spare fan. The backup fan is usually in a stalled state, and it is guaranteed to take over service immediately when the working fan is damaged, and it will not cause shutdown due to system fan damage.
