2020-06-18

 

Fivetech Slide Lock's lateral drive design is new  in the design of fasteners in server chassis cabinets. Elasticity generates resilience. It uses an angle mechanism to slide the module to lock and unlock. It can easily perform vertical operation in a limited horizontal space. Vertical sliding Operate to lock and unlock

 

When pulling out the server from the cabinet drawer of any server cabinet and chassis, the space between the server chassis needs to be restricted. Fivetech Slide Lock replaces the general operation mode from the top vertical operation mode to the fastening mode, but the advantage of performing the new purpose of the fastener sideways, you can easily use two fingers to pull the arrow to lock/unlock the plunger for release and assembly. Fivetech horizontal slide lock lateral drive design is the position-horizontal slide plunger, especially to meet the special needs of server cabinets designed for space constraints. The operation of the sliding plunger lateral sliding mode is simply to pull the arrow to pull out the plunger to complete the locking/unlocking action. Characteristic design structure Pulling laterally to lock/unlock the sliding plunger, the positioning can be achieved by hand pulling, and the sliding plunger can be locked/unlocked by pulling, and the design function of the pull handle can be customized.

 

The structure of Fivetech Slide Lock sliding plunger mechanism is to use the strong elastic force contained in the pin. The special funnel-shaped hole is specially designed for the sliding mode. The plastic knob parts are designed in a special shape, which is easy to pull the arrow. Even if it is used in any deep cabinet, we can also customize it to adjust the length and size of the knob. Lightweight plastic parts can be made into CI mark, which is anti-rust and anti-static. Sliding plunger can save space, improve speed, firm fixation.

 

 

 

 

2020-06-18

 

Fivetech 横向滑锁Slide Lock横向驱动设计在伺服器机柜设计扣件上創新, 弹力产生回弹力,使用斜角机构滑动模块以锁定解锁,在水平有限的空间内轻松进行垂直操作,垂直滑动操作以锁定解锁

从任何伺服器机柜机箱抽屉中拉出服务器时,服务器机柜之间都需要限制约束空间。 Fivetech 横向滑锁Slide Lock替代了从顶部垂直操作模式到紧固的一般模式,而是侧向执行紧固件新用途的优势,可以轻松地用两个手指来拉箭头锁定/解锁柱塞以进行释放和组装。 Fivetech横向滑锁横向驱动设计上創新-横向滑动柱塞,特别是为了满足针对空间限制而设计的伺服器机柜的特殊需求。滑动柱塞横向滑动模式的操作仅是拉箭头以拉出柱塞以完成锁定/解锁动作。特征设计结构侧向拉动以锁定/解锁滑动柱塞,手拉可以达到定位, 拉向滑动柱塞可锁定/解锁,拉手的外观设计功能可客制化, 为伺服器机柜机箱规格定制结构设计.

Fivetech 横向滑锁Slide Lock滑动柱塞机构的结构是利用销钉包含的强大弹力,特殊的漏斗形孔是专门为滑动模式设计的。塑料旋钮件为特殊形状设计,易于拉箭头,即使用于任何较深的柜子,我们也可以定制以调节旋钮的长度,尺寸。塑料零件重量轻可以制成CI标志,是防锈防静电。滑动柱塞可以节省空间,提高速度,固定牢固并造型美观。

 

 

2020-05-26

 

Fivetech's index design AUTO LOCK retractive type. The built-in ferrule metal stop and the lock metal stop have a strong stop structure and high mechanical reliability. Strong torsion structure and high mechanical reliability. Understand the best key fastener solution for the chassis handle lock of the servo storage equipment system

Servo storage equipment system chassis handle lock, using AUTO LOCK retractive type built-in torsion spring, Torsion Spring built-in ferrule metal stop and lock metal stop has a strong stop structure and high mechanical reliability, the plastic knob assembly with metal rivets has a strong torsion structure and high mechanical reliability. AUTO LOCK retractive type unlocking and locking function is an Fivetech index design , we can measure the size and performance of the chassis handle lock. AUTO LOCK is specially designed to lock when unlocking by simply Press; when returning locking, simply Twist can reversed to auto lock.

As the integration of server storage equipment is getting higher and higher, the defender of the handle lock used in the server chassis works regularly and stably for entire set of chassis is functioning properly, and the security state of being safe from danger of any possible damage caused by abnormal vibration or prevent sliding of the chassis . The design of the automatic locking fastener of the server is a key requirement. Because the switching frequency of the server chassis is usually very high, whether it can effectively lock automatically is one of the most prerequisites for the stable operation of the server

 

 

 

 

2020-05-26

 

Fivetech指标性设计自动锁回缩型,内建套圈金属止动部和锁止金属止动部具有较强的止动结构和较高的机械可靠性,带有金属铆钉的塑料旋钮组件具有较强的扭转结构和较高的机械可靠性。了解伺服存储设备系统机箱把手锁最佳关键扣件解决方案

伺服存储设备系统机箱把手锁, 利用自动锁回缩型内建扭簧Torsion Spring内建套圈金属止动部和锁止金属止动部具有较强的止动结构和较高的机械可靠性,带有金属铆钉的塑料旋钮组件具有较强的扭转结构和较高的机械可靠性。自动锁回缩型解锁上锁功能是Fivetech一指标性设计,我们可以衡量机箱把手锁规格尺寸性能在扣接处作局部自动锁AUTO LOCK对锁特殊设计,解锁时, 只需要简单按压Press即可解锁. 回归定位时, 同样扭转Twist 扣回即可自动上锁。

随着伺服器储存设备的集成度越来越高,伺服器机箱所用的把手锁是正常稳定工作的捍卫者,为了确保伺服器机箱不间断的工作,处于安全状态,避免因异常振动引起的任何可能损坏或防止机箱滑动的危险, 机箱被抽取开关高频率破坏性必须有良好的把手锁提供整组机箱的正常运作。因此,伺服器的自动锁扣件设计是关键必备条件。由于伺服器机箱抽取开关频率通常很高,能否有效地自动锁将是伺服器稳定工作的前提条件之一。

 

 

2020-05-14

 

Fivetech SMT Solder Stop Nut prevent the backflow of solder paste during SMT assembly to prevent thread contamination or damage.

 

Although the SMT process refers to the technology of melting tin as glue to the stable mechanical parts on the panel, the excess liquid tin can easily flow back to the inside of the bracket / nut, causing serious damage and pollution. The inflowing tin can damage the thread of the part. It forms tin shavings, uneven thread spirals, tin bumps and other defects. Due to the forced tightening, it is impossible to screw in and the solder spatters. Solder splatter not only damages the parts, but also causes tin chips to splash onto the PCB board, resulting in greater mechanical problems. The possibility of short circuit is also very high. This defect severely increases the failure rate of the product and increases the cost of rework. To make matters worse, due to rework, the production time will be extended.

 

Fivetech SMT Solder Stop Nut welding technology is the best way to solve this problem. The solder resist requires a stop ring plug that is mechanically placed at the bottom of the nut / support. It seamlessly matches the thread size. When SMT is used to mechanically seal these parts to the panel, the stop ring stop ring prevents liquid tin from flowing into the threaded hole. Therefore, it can keep the thread intact. It can then be easily removed by tool punching without leaving any marks or damage. The stop ring plug has high welding reliability, which can prevent the internal structure and threads of the ferrule from being damaged due to the inflow of the tines, which may result in the reduction of the float volume or the flow of solder paste between the PCB and the external ferrule. This may cause unstable reliability or other problems.

 

With the application of solder resist, defective nuts / supports have been significantly reduced. Ultimately, it can optimize the success rate of the production line. It can save costs, save time and increase the success rate. We strongly recommend Fivetech SMT Solder Stop Nut welding technology to bring benefits to our customers.

 

Fivetech SMT NUT 82 series can provide a complete product line for all thread sizes. The SMT welding process can eliminate the cause of stamping damage, thereby avoiding the risk of PCB damage. Fivetech 82 series SMT NUT used on PCBs have been widely accepted by the market. SMT technology has gradually developed into a mature technology, gradually replacing traditional assembly through its SMT process, so that the assembly process can achieve maximum yield, the industry can use the existing SMT production line, use vacuum nozzles to pick up SMT uts On the reel, pick and place it on the tin solder pasted on the PCB. Through the tin heating and cooling process, the tin is melted and cooled to a solid state to complete the SMT NUT assembly process. The SMT process can reduce the damage to the PCB caused by the placement of nuts on the PCB due to the deflection of the punch. This result is usually easy to damage the circuit board. In order to improve, the SMT process can accurately locate and obtain the maximum output.

 

The Fivetech SMT NUT 82 series completes the entire range of product lines in all sizes and models, offering custom designs and multiple options. Fivetech upholds the production quality advantages of quality control. From design and manufacturing to coil material out of the warehouse, a single production line ensures quality control. Fivetech SMT nuts have a high-quality appearance, which has won praise and reliable recommendations from customers.

 

 

Page 1 / 16